BUILT YEAR : 1997
MAIN SPECIFICATION
1. WELDAC the Induction Tube Welding System
- Nominal Output Power at coil terminal: 840Kw
- Frequency range: 160 ~ 220kHz
- Operating Frequency: Approx. 200kHz (dependent of load induction)
- Welding method: Contact Type

Manufacturer: Nassheuer, Technology: Continuous Tunnel Furnace, Heat treatments: Bright Annealing, Stress Relieving, Product: Carbon Steel Pipes, Atmosphere: Controlled Exo/Endothermic, Productivity: 5.0 T/h, Pipes Dimensional Range: 168.3mm, Furnace Total Length: 80m, Hot Chamber Length: 16.8m, Cold Chamber Length: 30.0m, Heating System: Natural Gas/Air Burners with Radiant Tubes, Regulation and Control: 8 K Thermocouples, Atmosphere Generator: Exogas Generator with 300 Sm3/h

O.D. 160"-450", Max. Wall Thickness 30mm, Two 80 KW DC Drive Motors, Pressure Sensing: Top Rolls-All, Bottom Rolls-Center; Motorized Angle Adjustment.

Diameter: 146mm - 325mm; Wall Thickness: 30mm (max); Length: 13m; Speed: 70mpm; Six (6) Straightening Rolls; Hydraulic Roll Adjustment; Two (2) DC Motors; In and Out Tables

OD capacity ¾" to 4"

Entry and exit table,
24' maximum lengths

3/4" - 4" Tube OD
5' - 24' Tube Lengths

6 Head Design, 7.5 HP Per Head, Belt Type Design, Entry Feed Table, Lower Stearing Rolls, Exit Stacker Table, Videojet 150 Marking Machine, Powerlex 40 Digital Controller, Allen Bradley PLC, Allen Bradley Panelview C600 Digital Readout, Monian Group Filteration System, Model PF 160

Number of rolls: 6
Number of power-driven rolls: 6 

Diameter range: 1.9"  to 6"
Maximum wall thickness: 1/2" 
Distance between rolls axes: 60" 
 (2) 50 KW Main Drive Motors,

Speed:30 to 165 MPM

Manufacturer: Kocks
Model: RM170
Year:  New in 1991
Diameter Tub minim:  18mm ( .700")
Diameter Tub maxim: 168,3mm (6.50")
Entry Table, Exit Table, Capable to Straighten Stainless Steel Tubes, Right to Left
Power:  6  motors  of 3Kw each for traction, one per roll.
The 3 top rolls are motorized and adjustable up and down

Model FR14/16
Flying Ram

4" OD Single Cut Capacity, 3" OD Double Cut Capacity, 7" Stroke, 24" Rail to Rail Overall Height, 3" Beta Ram Double Cut Die Set Included, Model Nick & Shear, Year 1980, Dimple Free, Hydraulic Clutch Brake, Die Accelerator, Hydraulic Actuation, Beta Ram Push Button Panel with Readouts, 30 HP AC Motor, Tallyrand Length Control, Hydraulic Servo Valve Design, Power Pull Out Roller